Termination w.r.t. Q proof of TRS/TRCSREx1_GM03

Termination w.r.t. Q of the following Term Rewriting System could not be shown:

Q restricted rewrite system:
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.

↳ QTRS

  ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.

Using Dependency Pairs [1,13] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

LEQ(mark(X1), X2) → LEQ(X1, X2)
ACTIVE(diff(X, Y)) → P(X)
P(mark(X)) → P(X)
LEQ(X1, mark(X2)) → LEQ(X1, X2)
PROPER(leq(X1, X2)) → LEQ(proper(X1), proper(X2))
ACTIVE(diff(X1, X2)) → DIFF(active(X1), X2)
S(mark(X)) → S(X)
ACTIVE(p(X)) → ACTIVE(X)
ACTIVE(leq(X1, X2)) → LEQ(active(X1), X2)
PROPER(diff(X1, X2)) → PROPER(X2)
ACTIVE(if(X1, X2, X3)) → IF(active(X1), X2, X3)
TOP(mark(X)) → TOP(proper(X))
IF(mark(X1), X2, X3) → IF(X1, X2, X3)
ACTIVE(diff(X, Y)) → LEQ(X, Y)
ACTIVE(diff(X1, X2)) → ACTIVE(X1)
ACTIVE(diff(X, Y)) → S(diff(p(X), Y))
ACTIVE(leq(s(X), s(Y))) → LEQ(X, Y)
DIFF(mark(X1), X2) → DIFF(X1, X2)
P(ok(X)) → P(X)
ACTIVE(leq(X1, X2)) → LEQ(X1, active(X2))
ACTIVE(leq(X1, X2)) → ACTIVE(X2)
TOP(ok(X)) → ACTIVE(X)
ACTIVE(s(X)) → S(active(X))
PROPER(s(X)) → PROPER(X)
ACTIVE(diff(X, Y)) → IF(leq(X, Y), 0, s(diff(p(X), Y)))
PROPER(diff(X1, X2)) → PROPER(X1)
PROPER(p(X)) → PROPER(X)
ACTIVE(diff(X1, X2)) → DIFF(X1, active(X2))
TOP(mark(X)) → PROPER(X)
PROPER(leq(X1, X2)) → PROPER(X1)
PROPER(leq(X1, X2)) → PROPER(X2)
DIFF(ok(X1), ok(X2)) → DIFF(X1, X2)
ACTIVE(diff(X1, X2)) → ACTIVE(X2)
PROPER(if(X1, X2, X3)) → PROPER(X1)
IF(ok(X1), ok(X2), ok(X3)) → IF(X1, X2, X3)
PROPER(diff(X1, X2)) → DIFF(proper(X1), proper(X2))
PROPER(if(X1, X2, X3)) → IF(proper(X1), proper(X2), proper(X3))
PROPER(p(X)) → P(proper(X))
PROPER(s(X)) → S(proper(X))
PROPER(if(X1, X2, X3)) → PROPER(X3)
ACTIVE(s(X)) → ACTIVE(X)
S(ok(X)) → S(X)
PROPER(if(X1, X2, X3)) → PROPER(X2)
DIFF(X1, mark(X2)) → DIFF(X1, X2)
ACTIVE(diff(X, Y)) → DIFF(p(X), Y)
ACTIVE(leq(X1, X2)) → ACTIVE(X1)
ACTIVE(p(X)) → P(active(X))
LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
TOP(ok(X)) → TOP(active(X))

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

Q DP problem:
The TRS P consists of the following rules:

LEQ(mark(X1), X2) → LEQ(X1, X2)
ACTIVE(diff(X, Y)) → P(X)
P(mark(X)) → P(X)
LEQ(X1, mark(X2)) → LEQ(X1, X2)
PROPER(leq(X1, X2)) → LEQ(proper(X1), proper(X2))
ACTIVE(diff(X1, X2)) → DIFF(active(X1), X2)
S(mark(X)) → S(X)
ACTIVE(p(X)) → ACTIVE(X)
ACTIVE(leq(X1, X2)) → LEQ(active(X1), X2)
PROPER(diff(X1, X2)) → PROPER(X2)
ACTIVE(if(X1, X2, X3)) → IF(active(X1), X2, X3)
TOP(mark(X)) → TOP(proper(X))
IF(mark(X1), X2, X3) → IF(X1, X2, X3)
ACTIVE(diff(X, Y)) → LEQ(X, Y)
ACTIVE(diff(X1, X2)) → ACTIVE(X1)
ACTIVE(diff(X, Y)) → S(diff(p(X), Y))
ACTIVE(leq(s(X), s(Y))) → LEQ(X, Y)
DIFF(mark(X1), X2) → DIFF(X1, X2)
P(ok(X)) → P(X)
ACTIVE(leq(X1, X2)) → LEQ(X1, active(X2))
ACTIVE(leq(X1, X2)) → ACTIVE(X2)
TOP(ok(X)) → ACTIVE(X)
ACTIVE(s(X)) → S(active(X))
PROPER(s(X)) → PROPER(X)
ACTIVE(diff(X, Y)) → IF(leq(X, Y), 0, s(diff(p(X), Y)))
PROPER(diff(X1, X2)) → PROPER(X1)
PROPER(p(X)) → PROPER(X)
ACTIVE(diff(X1, X2)) → DIFF(X1, active(X2))
TOP(mark(X)) → PROPER(X)
PROPER(leq(X1, X2)) → PROPER(X1)
PROPER(leq(X1, X2)) → PROPER(X2)
DIFF(ok(X1), ok(X2)) → DIFF(X1, X2)
ACTIVE(diff(X1, X2)) → ACTIVE(X2)
PROPER(if(X1, X2, X3)) → PROPER(X1)
IF(ok(X1), ok(X2), ok(X3)) → IF(X1, X2, X3)
PROPER(diff(X1, X2)) → DIFF(proper(X1), proper(X2))
PROPER(if(X1, X2, X3)) → IF(proper(X1), proper(X2), proper(X3))
PROPER(p(X)) → P(proper(X))
PROPER(s(X)) → S(proper(X))
PROPER(if(X1, X2, X3)) → PROPER(X3)
ACTIVE(s(X)) → ACTIVE(X)
S(ok(X)) → S(X)
PROPER(if(X1, X2, X3)) → PROPER(X2)
DIFF(X1, mark(X2)) → DIFF(X1, X2)
ACTIVE(diff(X, Y)) → DIFF(p(X), Y)
ACTIVE(leq(X1, X2)) → ACTIVE(X1)
ACTIVE(p(X)) → P(active(X))
LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
TOP(ok(X)) → TOP(active(X))

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We deleted some edges using various graph approximations

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(diff(X, Y)) → P(X)
LEQ(mark(X1), X2) → LEQ(X1, X2)
P(mark(X)) → P(X)
PROPER(leq(X1, X2)) → LEQ(proper(X1), proper(X2))
LEQ(X1, mark(X2)) → LEQ(X1, X2)
ACTIVE(diff(X1, X2)) → DIFF(active(X1), X2)
S(mark(X)) → S(X)
ACTIVE(p(X)) → ACTIVE(X)
PROPER(diff(X1, X2)) → PROPER(X2)
ACTIVE(leq(X1, X2)) → LEQ(active(X1), X2)
ACTIVE(if(X1, X2, X3)) → IF(active(X1), X2, X3)
TOP(mark(X)) → TOP(proper(X))
ACTIVE(diff(X, Y)) → LEQ(X, Y)
IF(mark(X1), X2, X3) → IF(X1, X2, X3)
ACTIVE(diff(X1, X2)) → ACTIVE(X1)
ACTIVE(diff(X, Y)) → S(diff(p(X), Y))
DIFF(mark(X1), X2) → DIFF(X1, X2)
ACTIVE(leq(s(X), s(Y))) → LEQ(X, Y)
P(ok(X)) → P(X)
ACTIVE(leq(X1, X2)) → LEQ(X1, active(X2))
ACTIVE(leq(X1, X2)) → ACTIVE(X2)
TOP(ok(X)) → ACTIVE(X)
ACTIVE(s(X)) → S(active(X))
PROPER(s(X)) → PROPER(X)
ACTIVE(diff(X, Y)) → IF(leq(X, Y), 0, s(diff(p(X), Y)))
PROPER(diff(X1, X2)) → PROPER(X1)
PROPER(p(X)) → PROPER(X)
ACTIVE(diff(X1, X2)) → DIFF(X1, active(X2))
TOP(mark(X)) → PROPER(X)
PROPER(leq(X1, X2)) → PROPER(X1)
DIFF(ok(X1), ok(X2)) → DIFF(X1, X2)
PROPER(leq(X1, X2)) → PROPER(X2)
ACTIVE(diff(X1, X2)) → ACTIVE(X2)
PROPER(if(X1, X2, X3)) → PROPER(X1)
IF(ok(X1), ok(X2), ok(X3)) → IF(X1, X2, X3)
PROPER(diff(X1, X2)) → DIFF(proper(X1), proper(X2))
PROPER(if(X1, X2, X3)) → IF(proper(X1), proper(X2), proper(X3))
PROPER(if(X1, X2, X3)) → PROPER(X3)
PROPER(s(X)) → S(proper(X))
PROPER(p(X)) → P(proper(X))
S(ok(X)) → S(X)
ACTIVE(s(X)) → ACTIVE(X)
PROPER(if(X1, X2, X3)) → PROPER(X2)
DIFF(X1, mark(X2)) → DIFF(X1, X2)
ACTIVE(diff(X, Y)) → DIFF(p(X), Y)
ACTIVE(leq(X1, X2)) → ACTIVE(X1)
ACTIVE(p(X)) → P(active(X))
LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
TOP(ok(X)) → TOP(active(X))
ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [13,14,18] contains 8 SCCs with 20 less nodes.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

                ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

DIFF(X1, mark(X2)) → DIFF(X1, X2)
DIFF(ok(X1), ok(X2)) → DIFF(X1, X2)
DIFF(mark(X1), X2) → DIFF(X1, X2)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

DIFF(mark(X1), X2) → DIFF(X1, X2)

The remaining pairs can at least be oriented weakly.

DIFF(X1, mark(X2)) → DIFF(X1, X2)
DIFF(ok(X1), ok(X2)) → DIFF(X1, X2)

Used ordering: Combined order from the following AFS and order.
DIFF(x1, x2) = DIFF(x1)
mark(x1) = mark(x1)
ok(x1) = x1

Recursive path order with status [2].
Precedence:

mark₁ > DIFF₁

Status:

mark₁: multiset
DIFF₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

DIFF(X1, mark(X2)) → DIFF(X1, X2)
DIFF(ok(X1), ok(X2)) → DIFF(X1, X2)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

DIFF(ok(X1), ok(X2)) → DIFF(X1, X2)

The remaining pairs can at least be oriented weakly.

DIFF(X1, mark(X2)) → DIFF(X1, X2)

Used ordering: Combined order from the following AFS and order.
DIFF(x1, x2) = DIFF(x1)
mark(x1) = x1
ok(x1) = ok(x1)

Recursive path order with status [2].
Precedence:

trivial

Status:

DIFF₁: multiset
ok₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

DIFF(X1, mark(X2)) → DIFF(X1, X2)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

DIFF(X1, mark(X2)) → DIFF(X1, X2)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
DIFF(x1, x2) = DIFF(x1, x2)
mark(x1) = mark(x1)

Recursive path order with status [2].
Precedence:

mark₁ > DIFF₂

Status:

mark₁: multiset
DIFF₂: [1,2]

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ PisEmptyProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

IF(mark(X1), X2, X3) → IF(X1, X2, X3)
IF(ok(X1), ok(X2), ok(X3)) → IF(X1, X2, X3)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

IF(ok(X1), ok(X2), ok(X3)) → IF(X1, X2, X3)

The remaining pairs can at least be oriented weakly.

IF(mark(X1), X2, X3) → IF(X1, X2, X3)

Used ordering: Combined order from the following AFS and order.
IF(x1, x2, x3) = IF(x2)
mark(x1) = x1
ok(x1) = ok(x1)

Recursive path order with status [2].
Precedence:

trivial

Status:

IF₁: multiset
ok₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

IF(mark(X1), X2, X3) → IF(X1, X2, X3)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

IF(mark(X1), X2, X3) → IF(X1, X2, X3)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
IF(x1, x2, x3) = IF(x1, x2, x3)
mark(x1) = mark(x1)

Recursive path order with status [2].
Precedence:

mark₁ > IF₃

Status:

mark₁: multiset
IF₃: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ PisEmptyProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
LEQ(mark(X1), X2) → LEQ(X1, X2)
LEQ(X1, mark(X2)) → LEQ(X1, X2)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

LEQ(mark(X1), X2) → LEQ(X1, X2)

The remaining pairs can at least be oriented weakly.

LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
LEQ(X1, mark(X2)) → LEQ(X1, X2)

Used ordering: Combined order from the following AFS and order.
LEQ(x1, x2) = LEQ(x1)
ok(x1) = x1
mark(x1) = mark(x1)

Recursive path order with status [2].
Precedence:

trivial

Status:

mark₁: multiset
LEQ₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)
LEQ(X1, mark(X2)) → LEQ(X1, X2)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

LEQ(ok(X1), ok(X2)) → LEQ(X1, X2)

The remaining pairs can at least be oriented weakly.

LEQ(X1, mark(X2)) → LEQ(X1, X2)

Used ordering: Combined order from the following AFS and order.
LEQ(x1, x2) = LEQ(x1)
ok(x1) = ok(x1)
mark(x1) = mark

Recursive path order with status [2].
Precedence:

ok₁ > LEQ₁
mark > LEQ₁

Status:

LEQ₁: multiset
ok₁: multiset
mark: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

LEQ(X1, mark(X2)) → LEQ(X1, X2)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

LEQ(X1, mark(X2)) → LEQ(X1, X2)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
LEQ(x1, x2) = LEQ(x1, x2)
mark(x1) = mark(x1)

Recursive path order with status [2].
Precedence:

mark₁ > LEQ₂

Status:

mark₁: multiset
LEQ₂: [1,2]

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ PisEmptyProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S(ok(X)) → S(X)
S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

S(ok(X)) → S(X)

The remaining pairs can at least be oriented weakly.

S(mark(X)) → S(X)

Used ordering: Combined order from the following AFS and order.
S(x1) = S(x1)
ok(x1) = ok(x1)
mark(x1) = x1

Recursive path order with status [2].
Precedence:

trivial

Status:

ok₁: multiset
S₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S(mark(X)) → S(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

S(mark(X)) → S(X)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
S(x1) = S(x1)
mark(x1) = mark(x1)

Recursive path order with status [2].
Precedence:

mark₁ > S₁

Status:

mark₁: multiset
S₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ PisEmptyProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

P(mark(X)) → P(X)
P(ok(X)) → P(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

P(mark(X)) → P(X)

The remaining pairs can at least be oriented weakly.

P(ok(X)) → P(X)

Used ordering: Combined order from the following AFS and order.
P(x1) = P(x1)
mark(x1) = mark(x1)
ok(x1) = x1

Recursive path order with status [2].
Precedence:

trivial

Status:

mark₁: multiset
P₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

P(ok(X)) → P(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

P(ok(X)) → P(X)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
P(x1) = P(x1)
ok(x1) = ok(x1)

Recursive path order with status [2].
Precedence:

ok₁ > P₁

Status:

P₁: multiset
ok₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ PisEmptyProof

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER(diff(X1, X2)) → PROPER(X2)
PROPER(leq(X1, X2)) → PROPER(X1)
PROPER(s(X)) → PROPER(X)
PROPER(leq(X1, X2)) → PROPER(X2)
PROPER(if(X1, X2, X3)) → PROPER(X3)
PROPER(if(X1, X2, X3)) → PROPER(X1)
PROPER(diff(X1, X2)) → PROPER(X1)
PROPER(if(X1, X2, X3)) → PROPER(X2)
PROPER(p(X)) → PROPER(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

PROPER(diff(X1, X2)) → PROPER(X2)
PROPER(leq(X1, X2)) → PROPER(X1)
PROPER(s(X)) → PROPER(X)
PROPER(leq(X1, X2)) → PROPER(X2)
PROPER(if(X1, X2, X3)) → PROPER(X3)
PROPER(if(X1, X2, X3)) → PROPER(X1)
PROPER(diff(X1, X2)) → PROPER(X1)
PROPER(if(X1, X2, X3)) → PROPER(X2)
PROPER(p(X)) → PROPER(X)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
PROPER(x1) = PROPER(x1)
diff(x1, x2) = diff(x1, x2)
leq(x1, x2) = leq(x1, x2)
s(x1) = s(x1)
if(x1, x2, x3) = if(x1, x2, x3)
p(x1) = p(x1)

Recursive path order with status [2].
Precedence:

diff₂ > PROPER₁
leq₂ > PROPER₁
s₁ > PROPER₁
if₃ > PROPER₁
p₁ > PROPER₁

Status:

if₃: multiset
PROPER₁: multiset
leq₂: multiset
s₁: multiset
diff₂: multiset
p₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ PisEmptyProof

              ↳ QDP

              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(diff(X1, X2)) → ACTIVE(X1)
ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(diff(X1, X2)) → ACTIVE(X2)
ACTIVE(leq(X1, X2)) → ACTIVE(X1)
ACTIVE(s(X)) → ACTIVE(X)
ACTIVE(leq(X1, X2)) → ACTIVE(X2)
ACTIVE(p(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ACTIVE(diff(X1, X2)) → ACTIVE(X1)
ACTIVE(diff(X1, X2)) → ACTIVE(X2)
ACTIVE(leq(X1, X2)) → ACTIVE(X1)
ACTIVE(leq(X1, X2)) → ACTIVE(X2)
ACTIVE(p(X)) → ACTIVE(X)

The remaining pairs can at least be oriented weakly.

ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(s(X)) → ACTIVE(X)

Used ordering: Combined order from the following AFS and order.
ACTIVE(x1) = ACTIVE(x1)
diff(x1, x2) = diff(x1, x2)
if(x1, x2, x3) = x1
leq(x1, x2) = leq(x1, x2)
s(x1) = x1
p(x1) = p(x1)

Recursive path order with status [2].
Precedence:

trivial

Status:

ACTIVE₁: [1]
leq₂: multiset
p₁: multiset
diff₂: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)
ACTIVE(s(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ACTIVE(if(X1, X2, X3)) → ACTIVE(X1)

The remaining pairs can at least be oriented weakly.

ACTIVE(s(X)) → ACTIVE(X)

Used ordering: Combined order from the following AFS and order.
ACTIVE(x1) = ACTIVE(x1)
if(x1, x2, x3) = if(x1, x2, x3)
s(x1) = x1

Recursive path order with status [2].
Precedence:

if₃ > ACTIVE₁

Status:

if₃: multiset
ACTIVE₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE(s(X)) → ACTIVE(X)

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ACTIVE(s(X)) → ACTIVE(X)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Combined order from the following AFS and order.
ACTIVE(x1) = ACTIVE(x1)
s(x1) = s(x1)

Recursive path order with status [2].
Precedence:

s₁ > ACTIVE₁

Status:

ACTIVE₁: multiset
s₁: multiset

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ PisEmptyProof

              ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ EdgeDeletionProof

        ↳ QDP

          ↳ DependencyGraphProof

            ↳ AND

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

              ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

TOP(ok(X)) → TOP(active(X))
TOP(mark(X)) → TOP(proper(X))

The TRS R consists of the following rules:

active(p(0)) → mark(0)
active(p(s(X))) → mark(X)
active(leq(0, Y)) → mark(true)
active(leq(s(X), 0)) → mark(false)
active(leq(s(X), s(Y))) → mark(leq(X, Y))
active(if(true, X, Y)) → mark(X)
active(if(false, X, Y)) → mark(Y)
active(diff(X, Y)) → mark(if(leq(X, Y), 0, s(diff(p(X), Y))))
active(p(X)) → p(active(X))
active(s(X)) → s(active(X))
active(leq(X1, X2)) → leq(active(X1), X2)
active(leq(X1, X2)) → leq(X1, active(X2))
active(if(X1, X2, X3)) → if(active(X1), X2, X3)
active(diff(X1, X2)) → diff(active(X1), X2)
active(diff(X1, X2)) → diff(X1, active(X2))
p(mark(X)) → mark(p(X))
s(mark(X)) → mark(s(X))
leq(mark(X1), X2) → mark(leq(X1, X2))
leq(X1, mark(X2)) → mark(leq(X1, X2))
if(mark(X1), X2, X3) → mark(if(X1, X2, X3))
diff(mark(X1), X2) → mark(diff(X1, X2))
diff(X1, mark(X2)) → mark(diff(X1, X2))
proper(p(X)) → p(proper(X))
proper(0) → ok(0)
proper(s(X)) → s(proper(X))
proper(leq(X1, X2)) → leq(proper(X1), proper(X2))
proper(true) → ok(true)
proper(false) → ok(false)
proper(if(X1, X2, X3)) → if(proper(X1), proper(X2), proper(X3))
proper(diff(X1, X2)) → diff(proper(X1), proper(X2))
p(ok(X)) → ok(p(X))
s(ok(X)) → ok(s(X))
leq(ok(X1), ok(X2)) → ok(leq(X1, X2))
if(ok(X1), ok(X2), ok(X3)) → ok(if(X1, X2, X3))
diff(ok(X1), ok(X2)) → ok(diff(X1, X2))
top(mark(X)) → top(proper(X))
top(ok(X)) → top(active(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.